F-One Rocket DW Pro Carbon
$2,649.00
SPECIAL ORDER – CONTACT US
ROCKET DW PRO
- Impressive glide for take-off
- Perfect and intuitive control
- Extremely light and responsive
- 5’10’’ x 23’5’’ 178 x 60 cm 95 L 4.9 KG – $2649
- 6’2’’ x 25’5’’ 189 x 65 cm 115 L 5.9 KG – $2699
- CARBON COMPOSITE
- FULL PAD NEOPRENE
- HANDLES (X2)
- FRONT STRAP INSERTS
- TWIN TRACKS
- Ref. 77208-0602
There isn’t much that comes out as elegant and efficient as a downwind rider foiling for miles over the galloping swell. A board with a foil, a rider and his paddle: an ocean of lines to run and carve. The Rocket DW Pro is designed right for that purpose: take-off with a paddle and fly for miles. A downwind foiling board spends most of its time flying so it must provide sharp and intuitive control while in the air. Additionally, the board must offer the best possible take-off using the smallest bump or even on flat-water.
The Rocket DW Pro features a compact shape with moderate beam and some straight bottom lines to help the rider get up to speed for take-off. The extra volume in the nose further helps getting some momentum for take-off when in the bumps. The glide is impressive for such a short board. The tall side walls are chamfered towards the bottom using bevels which reduce the drag and help stabilize the board during occasional touch-downs. The nose of the board is streamlined for that same purpose as well as reducing windage.
The Rocket DW Pro is nimble in the air and stable on the water. Stability is enhanced by a recessed cockpit featuring a concave shape for sharper control. The large pad offers total freedom of stance and complete comfort. Experienced riders below 80kg are advised to opt out for the 5’10 / 95l. while the heavier riders will profit from the extra volume of 6’2 / 115l. The bigger board is also the perfect option for new-comers willing to get more serious about downwind foiling.
The Rocket DW Pro performances are served by a very light race board construction mixing carbon composite over a light weight core. Specific reinforcements are applied locally in the cockpit and around the twin-track system to sustain the stresses induced by paddling, foiling and pumping.
The deck features a number of inserts to add a front foot strap (goofy/regular setup) and two neoprene grab handles, all available as spare options.
Combining cutting edge performances and timeless lines, the Rocket DW Pro offers striking performances and behavior for downwind foiling.
Related products
-
SALE F-One Rocket Surf 4’6″
20% OFF, Limited stock, call for availabiliy
Specifically designed for surf-foiling, the Rocket surf range has all you need to make the most of your foil.
- Specifically designed for surf-foiling
- Easy take-off and high performance during flight
- Twin-tracks setup
Once in the air, shorter board length translates directly into more maneuverability and a more efficient pumping. However you still need enough volume to take the waves, so we have placed maximum volume under the chest in order to provide an easy paddling and take-off. The round outline allows an even volume distribution on a very compact board which brings stability both in the water and in the air.
The board is easily maneuverable thanks to its compact shape and narrow tail. The distinctive kick-tail and pronounced double concave provide an easy release, even if the board touches the water while flying.
We have designed a concave deck to lower the center of gravity and bring the feet closer to the foil, it allows a better board control once in the air. It also helps passing your knees and feet while taking-off.
Rockets are built with a light and tough bamboo sandwich laminate around a lightweight EPS core, thereby achieving a great resistance to weight ratio and a great performance while riding and pumping around.
We use very thin pads in order to respect the shape at most. The boards come with a tail pad, while a front pad is included as an accessory which can be fitted on or not, depending on personal preferences.
All boards are fitted with a US track system to accommodate any foil with a 4-bolt top plate.
$1,579.00$1,263.00 -
F One Madeiro Pro
$2,219.00$2,119.00 – $2,539.00
Program: Performance Wave
Waves: Small to big
- New 2020 shape
- Instinctive take off
- Amazing manoeuvrability
- Sharp turn, speed, power
Get the most out of every wave!
The MADEIRO is the board for all riders looking to perform in all wave types.
PRESENTATION
This year we have made considerable changes in order to increase the performances of the board in all wave types.
We have increased the volume of the nose and added more rocker towards it.
Having increased the volume of the nose brings more stability and a better longitudinal balance. Take-off is easier and this volume helps during the bottom-turns for very intuitive carving.The MADEIRO has now a round/pintail which brings more fluidity and manoeuvrability. Rail-to-rail surfing, easy top turns and less speed loss.
The hull keeps its simple concave with thinner rails thanks to the bevels. F-ONE Surf SUP boards have quite some width for their given volume. It allows to get the necessary stability whilst keeping thinner rails. The MADEIRO surfs better with thinner rails and more width than with thicker rails and less width.
The smaller sizes (< 8’0”) are genuine high performance surf boards, very well balanced and especially responsive to perform the most explosive surf. They have new width 6’8 x 23.5 – 7’2 x 24.5 – 7’5 x 25.5 – 7’7 x 26.5 – 7’9 x 27.5.
The middle sizes (8’0” / 8’3”) offer a very dynamic behaviour with enough volume to let all types of riders express themselves with some progressive and committed surf. Available in 8’0 x 29 – 8’3 x 30
The larger sizes (8’5” / 8’8”) are very accessible wave boards with a lot of stability. They remain very responsive in the waves and offer a lot of possibilities for the heavier riders or those less experimented. This year they are narrower and have the new shape, available in: 8’5 x 31 – 8’8 x 32
CONSTRUCTION
The PRO CARBON construction is available on the whole range from 6’8” to 8’8”. The deck is built from layers of glass, bamboo and some bi-axial carbon fabrics. The bottom features an HD foam sandwich with glass layers and some bi-axial carbon fabrics. The brushed carbon finish ensures the weight remains minimal. This construction brings an impressive resistance to the MADEIRO range combined with absolute light weight.
SIZE DIMENSION VOLUME WEIGHT DECK INSERTS FIN BOXES DELIVERED WITH 6’8” 23.5″ 203 x 60 cm 56 L 4.8 kg* GoPro + F-One Handle + Leash Plug 5x Futures 2x Profiler M (Rear Quad) Turquoise2x Profiler M (Rear Quad) Turquoise 7’2’’ x 24.5’’ 218 x 62 cm 72 L 5.1 kg* GoPro + F-One Handle + Leash Plug 5x Futures 2x Profiler M (Rear Quad) Turquoise2x Profiler M (Rear Quad) Turquoise 7’5” x 25.5” 226 x 65 cm 80 L 5.7 kg* GoPro + F-One Handle + Leash Plug 5x Futures 2x Profiler M (Rear Quad) Turquoise2x Profiler M (Rear Quad) Turquoise 7’7’’ x 26.5’’ 231 x 67 cm 85 L 5.9 kg* GoPro + F-One Handle + Leash Plug 5x Futures 2x Profiler M (Rear Quad) Turquoise2x Profiler M (Rear Quad) Turquoise 7’9’’ x 27.5’’ 236 x 70 cm 91 L 6.3 kg* GoPro + F-One Handle + Leash Plug 5x Futures 2x Profiler M (Rear Quad) Turquoise2x Profiler M (Rear Quad) Turquoise 8’0” x 29” 244 x 74 cm 100 L 6.9 kg* GoPro + F-One Handle + Leash Plug 5x Futures CENTRO 4.5’’ + 2x Profiler M (Front fins) Turquoise 8’3’’ x 30’’ 250 x 76 cm 110 L 7.4 kg* GoPro + F-One Handle + Leash Plug 5x Futures CENTRO 5.5’’ + 2x Profiler M (Front fins) Turquoise 8’5’’ x 31’’ 258 x 78.5 cm 125 L 7.8 kg* GoPro + F-One Handle + Leash Plug 5x Futures CENTRO 5.5’’ + 2x Profiler M (Front fins) Turquoise 8’8’’ x 32’’ 266 x 81.5 cm 136 L 8.3 kg* GoPro + F-One Handle + Leash Plug 5x Futures CENTRO 6’’ + 2x Profiler M (Front fins) Turquoise *indicative value, subject to small variations due to the custom manufacturing process.
FIN SIZE
FRONT QUAD Base: 112 mmDepth: 116 mm Concave Profile
Base: 99 mmDepth: 102 mm Symmetrical
-
SALE – KT Drifter Kite
$959.0020% OFF on selected Quatro Board available in store, call for more info
The Drifter K is a dedicated kite foil board. Short length and little volume, meant for putting your small kites on and going for a lightning glide.
A parallel outline provides the maximum efficient ride for its super reduced size and volume.
KT Surfing’s signature Quad Concave Bottom with beveled rails and concaves in the bevels are optimized for the softest and quickest touchdown and release.
Cutouts have been introduced for less surface area and to make the board feel smaller than it is. A beveled tail further softens the takeoff and release.
The construction is built around an EPS core with Carbon and Glass laminate encompassing the deck and bottom. Specific reinforcements create a zero-lag symbiosis with the foil.
The Drifter K comes with inserts and a pad, but without straps.
Carbon & Glass Construction.
Available in 3’6” feet.
Track Box.
Sapphire Yellow.