F-One Gravity 1800
The F-ONE GRAVITY 1800 wing is ideal to enjoy the smallest waves, venture on downwinders
- Maximum lift with smooth delivery
- Very stable and intuitive
- Pumping machine
Area : 1760 cm²
Aspect Ratio : 4.6
Designed for early lift, great stability and efficient pumping.
- Specific connection developed for larger wings
- New and thicker section profile for an early and very progressive lift-off
- Larger area with increased span and high aspect ratio
Design targets lift and glide:
- Easy take-off at low speed, ideal for the smallest waves
- Good turning ability in waves and bumps
- Superior glide on downwinders
Targeted at people looking for maximum lift without compromising glide and control:
- Very easy and stable to learn and progress.
- Able to fly and get some fun in the most insignificant waves.
- Very good pumping to go catch the next next wave, or the one after!
- Its stability and glide also make it a perfect wing to use on downwinders
Built with pre-preg carbon for the best weight to strength ratio, with a super light core.
Titan connection: the wing connects directly to the mast via the Titan mast foot and the fuselage is split in two parts in order to simplify transportation. This setup offers better load transmission and better stiffness throughout the different parts for maximum control.
$799 – $999
The Rocket Air range is a line of inflatable board dedicated to foiling sports: Surf-foil, SUP-foil, Wing-foil, Wind-foil and even Kite-foil.
Easy to store and carry
Balanced and light for flying
Superior and extra stiff Dropstitch material
Starting at 4’6 (55l.) and going all the way to 7’11 (185l.) the line includes boards for all sports and all types of riders. They are developed following the same sizes & outlines as the rigid boards, they offer great stability with the extra volume brought by the inflatable technology. The foil position is also identical to the rigid boards and provide the same perfect balance for take-off and in flight.
The 5’5, 5’10 and 6’6 are ideal sizes for Wing foiling with a Swing, offering a variety of volumes to suit everyone.
The Rocket Air boards are built using higher grade dropstitch with a fused, twin layer shell and a specific dropstitch pattern bringing extra stiffness which is essential to control the board properly when foiling.
The weight of the board is incredibly light which makes them easy to handle and a lot of fun, even for advanced riders.
Finally, the Rocket Air boards can all be stored in a small bag to be easily brought on for your next adventure.
The 7’11 has 2 x US box up the middle of the board to receive 2 x optional fins, and to improve upwind ability when not foiling
152 x 56 cm
4’10 x 22″x 5″
163 x 63 cm
5’4 x 25″x 5″
178 x 73 cm
5’10 x 29″x 5″
193 x 76 cm
6’6 x 30″x 5″
227x 76 cm
7’6 x 30″x 5″
242 x 78 cm
7’11 x 31″x 5″
4’10” – $799
5’4″ and 5’10” – $879
6’6″ – $889
7’6″ – $959
7’11” – $999
$1,959.00 – $2,259.00
The Flying V is Jimmy’s latest foil SUP. Featuring max volume and blocky rails for maximum stability and paddling, the Flying V allows the rider to ride a much shorter board than usual for the ultimate in foiling performance. The beveled chine rails provide easy lift-off and touch-down, and the tail lift keeps the tail clear when pumping.
These short lengths allow for much better performance, maneuverability, and glide once on foil and the extra width through the full outline of the board, especially the tail, gives you incredible stability, paddling and tracking for these short boards.
The rocker line was also designed with stability, tracking, and paddle speed in mind but also to not “stick” in the nose when coming down from the foil. The tail rocker is also very important in giving you that initial “pop” and water release to effortlessly get up on foil. We were very lucky to work with Alex Aguera from Go Foil who helped us with the testing/development of these boards and gave us expert knowledge on optimum Tuttle box placement as well as ideal stance and foot placement.
Generally a lighter board will allow you to glide longer on foil which makes our Signature and Carbon Sandwich constructions the perfect match for these boards to keep them very light weight while giving maximum strength and reinforcement for the Tuttle box. The deck pad has a center line as well as two horizontal lines for riders to get an accurate and quick visual reference for foot placement for riding without straps. Board has 5 different insert options for foot strap location and comes with foot straps.
The boards feature both a Tuttle box and a plate attachment for maximum flexibility.
5’11” X 28.5″, 4 3/8″ thick, 105 liters
6’5″ X 28,5″, 4.25″ thick, 115 liters
6’11” X 29″, 4 3/8″ thick, 129 liters
7’5″ X 30″, 4 5/8″ thick, 152 liters
7’11” X 31″, 5″ thick, 180 liters
20% OFF on selected Quatro Board available in store, call for more info
The Drifter W is a Wake / Kite crossover. Shorter lengths and smaller volumes make for easy pumping and control at speed when being towed and riding the wake.
A slight concave deck delivers a more connected feeling to your feet. It acts like a skateboard deck where you always find something to push on when turning and pumping.
KT Surfing’s signature Quad Concave Bottom with beveled rails and concaves in the bevels are optimized for the softest and quickest touchdown and release.
Cutouts have been introduced for less surface area and to make the board feel smaller than it is. A beveled tail further softens the takeoff and release.
The construction is built around an EPS core with Carbon and Glass laminate encompassing the deck and bottom. Specific reinforcements create a zero-lag symbiosis with the foil.
All sizes come with inserts and pads, but without straps.
Carbon & Glass Construction.
Available in 4’0”, 4’4” feet.