Hyper Foil LiteTech

NEW ALL NEW SHORTER SIZE

The all new shorter size range from 5’11” to 7’2″ makes it easier to maneuver and control when flying, yet retains the stability needed to get into waves early.

NEW SHORTER ROUNDED NOSE OUTLINE

MAKES THE HYPER FOIL MORE DYNAMIC AND MANEUVERABLE

Better turning ability and less swing weight mean tighter turns and flying on the foil for longer. The 5” shorter length makes it smoother to turn without the nose catching and easier to trim the board.

NEW THE BOXY RAIL

Have a square shoulder rail to widen the deck area, making the boards feel wider and more stable. This extra volume makes a massive difference to have that little extra support and balance.

NEW REFINED FOIL BOX ANGLE

The rocker has been flattened in the center to ensure the foil box angle is always at 90 degrees, offering the most controlled and consistent lift for the best possible foil experience.

EW FOIL BOX POSITION

The position of the box is optimized for downwind, pump foiling and wave riding. All constructions now feature the plate mount only, giving the flexibility to adjust the position for more or less lift and changing conditions.

NEW THE STRAIGHT OUTLINE

Optimizes the volume and stability to ride a short board that is compact and easy to control when flying.

ROUNDED VEE NOSE

Reduces the nose sticking and subsequent speed loss when touching down after flying. It also helps break the surface tension for faster release and lift.

CHANNEL TAIL

• Provides stability similar to a trimaran. It also increases the tracking and control which is crucial when paddling shorter boards.
• The channels help reduce the wetted surface area to maintain speed on touchdowns and releases earlier when getting up.

SHARP CHANNEL EDGE

Gives a clean release point so the tail doesn’t drag.

FOOT STRAP INSERTS

• 5 hole inserts make it easy to adjust the position and tightness of the strap based on rider preference.
• Front foot strap has centered inserts and 45 degree angled, accomodating different rider stances and also wing foiling.
• Both front and back strap inserts have a wider spread to adjust and move the feet freely when trimming the board.
• The back strap has center inserts only, so you always have the foot centered over the foil box.
• Footstraps not included. Sold separately aftermarket. Our footstraps use M7x32 Torx Screws. Please contact your nearest Starboard shops