Starboard Hyper Foil 3 in 1
$1,499.00
IN STOCK:
*Limited Series only*
7’2″ x 28″ -114L $1,499
HYPER NUT FOIL 3-IN-1
The Hyper Nut’s wide nose and tail make it a stable shape for you to get up and riding early.
Available in 7’2″ x 28″ / 114 Litre
WHERE VERSATILITY MEETS LIGHTWEIGHT
NEW PLATE MOUNT ONLYA new longer 12” US box, giving you more room to adjust the position to suit your riding style and conditions.
The front strap has a 45 degree angled strap suited for wing-boarding. The back strap is centered with a wide spread of 20cm to give you plenty of room to adjust the trim and move within the straps.
A new larger foot strap that has a wider spread is supplied with Blue Carbon and be purchased after market for Starlite and the Limited Series.
Limits you catching the nose through turns and is easier to paddle out through white water.
• Increases stability and speed on the wave as you can engage the entire rail length.
• Easier to pivot turn & fit into smaller sections of the waves.
• Extra stability and pop when paddling out over whitewater.
THE INVERTED NUT RAILSProvide insane acceleration and a pivot point for tight turning.
EXTENDS THE WATERLINE
• Providing speed that is comparable to a longer board.
• A curved outline has less rail engaged at one time.
Gives you more bite through the turns.
Act as a pivot point to drive through turns.
• Easier to engage the rail on the wave with less foot pressure.
• As the Hyper Nut has such a wide tail it is essential for rail thickness to be responsive in turns.
Adds stability and makes for easy rail-to-rail transitions.
Produces speed, helps get into waves easily and adds stability.
• Pro rocker down the center of the board for tight pocket turning.
• Creates a flat spot in front of the fins for extra acceleration.
The front fins have more angle helping you to engage earlier and have more grip on the wave, while the rear fins are straighter giving you more drive and speed
• 3.7 rear side fins make it much easier to slide the tail for more radical turns with less effort.
• Quad fin set up uses 4 side fins and gives fast acceleration and instant down the line speed as it does not have a drag from a centre fin.
A self-ventilating air valve is available on the board. This valve is self-ventilating so, it should not be touched or removed – otherwise, you are at risk of damaging the valve system.
LIMITED SERIES
TIMELESS LOOK, SOLID PERFORMANCE
• Twin T-stringers made from glass fibre are positioned on the deck and bottom of the board close to the rail, providing a massive increase in the overall strength against total breakage in surf.
• An additional wide layer of 200g glass wraps the rails for higher strength against paddle impact and further reinforces the overall strength against buckling.
• The deck features reinforced biaxial glass and Australian pine, to resist heel dents and impact from the standing area.
• The nose and tail are wrapped in multiple layers of glass fiber for further strength on these impact zones.
The honeycomb pad structure makes this design truly stand out. Not only does it look unique and bene ts from a reduction in weight from a full pad, we believe it offers one of the best grips we have ever used.
The small gaps between the pads give you multiple corners to wedge your feet against, providing the rider additional grip and more control to drive the board harder through turns. The diamond grooving is incredibly secure under foot, combining the corduroy wings allowing the rider to feel when they are close to the tail of the board.
PROTECTS AGAINST TOTAL BREAKAGE
The combination of twin T-stringers deck and bottom work together to increase the overall total breakage strength. The T-stringers are positioned close to the rail acting similar to an i-beam to endure heavy drops and strong wipe outs.
The fin boxes are molded with extra strong Akulon Eco, made from upcycled fishing net, then wrapped high density foam and sandwiched in over 1000 grams of glass reinforcements.
In the standing area, nose and tail increase impact resistance. An additional wide layer of 200g glass wraps the rails for higher strength against paddle impact, and further reinforces the overall strength against buckling.
Shear resistant, fused and moulded individually to fit each and every Starboard board providing high strength at the lightest weight. Our moulded core technology produces zero EPS wastage.
IQ handle for easy carrying, made from recycled ABS.
SUSTAINABLY SOURCED PINE
A standing area of 0.6mm Australian Pine is added for extra deck impact resistance and rigidity.
| Construction | ASAP, Starshot Red, Starshot Blue |
|---|
Related products
-
F-One Noosa Pro
$2,559.00$2,559.00 – $2,739.00
The NOOSA offers amazing longboard SUP performance in surf.
- Insane Speed and glide
- Improved take-offs
- Impressive maneuverability
Not only is this the original shape which inspired the first and early SUP boards, but it also offers some noticeable advantages.
Length offers both speed and glide especially when combined to a narrower width, and this greatly improves the take-off. The moderate beam also ensures the board is easy to set on the rail, providing a nice acceleration once on the wave.
The rocker of the board has received a lot of attention to make sure the board glides well using its bottom but also remains manoeuvrable when it’s being steered from the back when surfing.The NOOSA is particularly impressive in its manoeuvrability and ease of use when you consider its actual length.
The surprising aspect of this shape is that it will let you surf small waves thanks to its genuine speed, but also some larger ones since you can dig the rail and stay in complete control.
Take-off on larger waves is also made easier by its paddling speed. This board has a great gliding feel and will let you perform some nose tricks with its timeless longboard look.CONSTRUCTION
The PRO CARBON construction is built from layers of glass, bamboo and some bi-axial carbon fabrics. The bottom features an HD foam sandwich with glass layers and some bi-axial carbon fabrics. The brushed carbon finish ensures the weight remains minimal. This construction brings an impressive resistance combined with absolute light weight. These boards feature an amazing strength to weight ratio and remain amongst the highest performing and lightest boards on the market.
SIZE DIMENSION VOLUME WEIGHT DECK INSERTS FIN BOXES DELIVERED WITH 9’0’’ x 28.75’’ 275 x 73 cm 116 L 7.6 kg* GoPro + F-One Handle + Leash Plug 2x Futures + 1 US CENTRO 7’’ + 2x F-ONE PROFILER M (FRONT) 9’0″ x 26.75″ Comp 275 x 68 cm 100 L 7.4 kg* GoPro + F-One Handle + Leash Plug 2x Futures + 1 US CENTRO 7’’ + 2x F-ONE PROFILER M (FRONT) 10’ x 30’’ 305 x 76 cm 138 L 8.8 kg* GoPro + F-One Handle + Leash Plug 2x Futures + 1 US CENTRO 8’’ + 2x F-ONE PROFILER M (FRONT) 10′ x 27.75″ Comp 305 x 70.5 cm 118 L 8.5 kg* GoPro + F-One Handle + Leash Plug 2x Futures + 1 US CENTRO 8’’ + 2x F-ONE PROFILER M (FRONT) *indicative value, subject to small variations due to the custom manufacturing process.
FIN SIZE (Profiler)
FRONT QUAD Base: 112 mmDepth: 116 mm Concave Profile
Base: 99 mmDepth: 102 mm Symmetrical
-
Jimmy Lewis Super Tech
$1,699.00$1,699.00 – $2,199.00
The most advanced wave board in the line. Low volume and narrow. This is our “short board” in the stand up line originating from our high performance short board designs. The rocker of this board fits into the pocket of the wave and allows for quick, tight maneuverability. The single concave in the center flowing to double concave in front of and through the fins gives the board lift and drive for maximum speed.
5 fin box set up.
Comes with JL 5 fin set. (allows for thruster or quad fin set up).
Thruster set size- 4.5″
Quad set size- Front 4.5″ Back 4.0″SIZES
- 7’5″x26.5″x3.5″ (82L)
- 7’10″x27.5″x3.65″ (94L)
- 8’3″x28.5″x3.75″ (105L)
- 8’8″x29″x3.75″ (112L)
- 9’1″x30.5″x3.9″ (128L)
- 9’6″x31.5″x4.1″ (145L)
COLORS
- Forsythe Graphics
BOARD CONSTRUCTION:
- JL Classic construction
- JL Carbon construction
-
Starboard All Star
$3,000.00OUT OF STOCK!
$2,860.00 – $4,400.00
From entry-level riders to elite racers, the All Star is the world’s most winning, versatile and user-friendly race paddle board design.
The All Star comes in sizes for all rider weights and skill levels. The 24.5” and wider are suited for heavier riders, while the 23” and the new 21.75” are for higher-skilled and lighter riders.ULTRA STABLE, HIGH-PERFORMANCE RACE SHAPES DESIGNED BY WORLD-CLASS ATHLETES
YOU RIDE WHAT OUR PRO’S RIDE
All our Starboard team riders’ race and win on production boards from our own moulds.
NEW NARROWER OUTLINE
New narrower 21.75” is the fastest model for highly skilled & lighter riders, with comparable and even more stability than its predecessor – the 22.5”.NEW NARROWER & SHARPER VEE NOSE
Slices through the water with a cleaner entry, increasing acceleration and glide.
NEW LOWER ROUND VEE BOTTOM
The center vee height has been lowered, creating a flatter overall bottom shape. This reduces the roll from side to side, increasing overall control, tracking and stability.
NEW REFINED STANDING AREA THICKNESS
Limits water entering and helps water flush out quickly.
NEW SOFTER RAIL EDGE AT THE TAIL
Increases overall glide and is more maneuverable to change direction and steer the board downwind.
SUPER EFFICIENT DRAINAGE
4 drainage holes help flush water out of the standing area as quickly as possible.
DRAIN COVERS FOR FASTER RELEASE
Stick on drain covers reduces water entering the standing tray, creates suction to remove any water inside, and has a smooth release when paddling.
ⓘ We recommend using the drain covers to match the given rider weight.
OPTIMIZED NOSE VOLUME
• Provides greater float and lift in flat water, allowing for faster acceleration.
• Gives greater buoyancy and lift upwind and prevents nose-diving when paddling downwind.
• The pop and release allow the rider to maintain glide with a steady cadence.
NEW SELF-VENTILATING VALVE
A self-ventilating air valve is available on the board. This valve is self-ventilating so, it should not be touched or removed – otherwise, you are at risk of damaging the valve system.CARBON SANDWICH
LIGHTEST WEIGHT, DURABILITY, FLEX CONTROL
• Lightest and strongest race board construction is up to 500g lighter.
• Super light-weight biaxial carbon is laminated over the standing area and full bottom.
• While the stronger 150g Biaxial carbon wraps the nose and rail and the best strength ratio and efficient flex.
• High-density PVC is used in the standing area and full bottom maximizing strength and long-term durability.WOOD CARBON
GREAT STRENGTH, COMPETITIVE WEIGHT, VALUE OFFERING
• Australian Pine reinforcement is used on the full length of the standing area for extra impact strength against dents.
• New UD Carbon-reinforced standing area provides extra durability and stiffness at the greatest impact zone.
• UD Carbon reinforcements cover the rail, increasing the strength longitudinally and offer faster recoil.
